Areas of application & functions
The proven concept from the previous HEGENSCHEIDT jack series, consisting of an integrated base plate for optimum stability and the use of the well-known reliable safety valve, has also been retained in the latest generation. The rerail jacks have been designed in such a way that safe operation is guaranteed even in a 6-degree inclined position. At the same time, the weight of the jacks has been reduced by up to 20% compared to the old TH series to ensure easy and comfortable handling of the equipment. The equipment also impresses with significantly reduced maintenance costs.
Lifting jack series
Lifting Jack Series 400
Type | TH-30 400 | TH-30 400 |
Order no. | 04-1042 TH-30 | 04-2042 TH-30 |
Overall height (mm) | 250 | 450 |
Number of pistons | 2 | 2 |
Total stroke (mm) | 220 | 589 |
Stroke I (mm) | 116 | 299 |
Stroke II (mm) | 104 | 290 |
Effective force I* (kN) | 429 | 429 |
Effective force II* (kN) | 191 | 191 |
Filling volume (l) | 2,4 | 6,2 |
Base flange Ø (mm) | 295 | 295 |
Weight (kg) | 27 | 38,7 |
Operating pressure (MPa) | 30 | 30 |
* Possible deviation of the specified forces: ±5 %
Lifting Jack Series 600
Type | TH-30 600 | TH-30 600 |
Order no. | 04-1062 TH-30 | 04-2062 TH-30 |
Overall height (mm) | 250 | 425 |
Number of pistons | 2 | 2 |
Total stroke (mm) | 195 | 500 |
Stroke I (mm) | 103 | 250 |
Stroke II (mm) | 92 | 250 |
Effective force I* (kN) | 641 | 641 |
Effective force II* (kN) | 312 | 312 |
Filling volume (l) | 3,3 | 8,1 |
Base flange Ø (mm) | 295 | 295 |
Weight (kg) | 33 | 46,6 |
Operating pressure (MPa) | 30 | 30 |
* Possible deviation of the specified forces: ±5 %
Lifting Jack Series 1000
Type | TH 1000/500/200-170 | |
Order no. | 04-0103 | |
Overall height (mm) | 170 | |
Number of pistons | 3 | |
Total stroke (mm) | 198 | |
Stroke I (mm) | 76 | |
Stroke II (mm) | 61 | |
Stroke III (mm) | 61 | |
Effective force I* (kN) | 1039 | |
Effective force II* (kN) | 495 | |
Effective force III* (kN) | 190 | |
Filling volume (l) | 4,1 | |
Base flange Ø (mm) | 344 | |
Weight (kg) | 41 | |
Order no. Mounting kit | 04-0104 | 04-0106 |
Stroke extension (mm) | 4 x 55 = 220 | 06 x 55 = 330 |
* Possible deviation of the specified forces: ±5 %
Lifting Jack Series 1200
Type | TH-30 1200 | TH-30 1200 |
Order no. | 04-1122 TH-30 | 04-2122 TH-30 |
Overall height (mm) | 250 | 420 |
Number of pistons | 2 | 2 |
Total stroke (mm) | 188 | 500 |
Stroke I (mm) | 95 | 250 |
Stroke II (mm) | 93 | 250 |
Effective force I* (kN) | 1246 | 1246 |
Effective force II* (kN) | 642 | 642 |
Filling volume (l) | 6 | 16 |
Bottom flange Ø (mm) | 375 | 375 |
Weight (kg) | 53,2 | 76,7 |
Operating pressure (MPa) | 30 | 30 |
Three-piston jacks are also available in this jack series on request.
* Possible deviation of the specified forces: ±5 %
Other jacks
1. single-piston jacks EH 350 and EH 200 These jacks can be used for different tasks by using different attachments:
- By using the claw (order no. 04-0041-P), large strokes are possible at low lifting points.
- With the pressure piece supplied as standard, it is always used when high lifting points and large strokes are required.
- When using the head piece (06-2352), round head piece (06-2353), and articulated support plate (06-3351), the 04-0041 jack is an important component of the lifting device.
2. tipping jack The tipping device is used to lift two-axle vehicles and place them on the track. The tipping jack simultaneously performs the lifting and lateral movement, while the associated catch bracket prevents the wheel from rolling over.
3. internal jack EH 100 This single-piston jack is designed for internal lifting points on streetcars and subway railcars. The internal jack is designed with a pilot-operated non-return valve with pressure protection on both sides. The piston, which extends downwards, is equipped with an articulated plate to compensate for inclined positions of the jack. The design can be adapted to the corresponding lifting devices or adapter shapes, threaded connections, and suspension functions. The bayonet adapter can be positioned as required, e.g. in the middle or at the top.
Other lifting jacks
Type | EH 350-1030 gr. claw lifter | EH 350-1030 without claw | EH 200-658 small claw lifter | EH 200-597 Tilt lifter | EH 100 Internal lifter |
Order no. | 04-0041P | 04-0041 | 04-0021-1 | 04-0021-2 | 04-0010 |
Overall height (mm) | 1030 | 1030 | 658 | 597 | *** |
Number of pistons | 1 | 1 | 1 | 1 | 1 |
Total stroke (mm) | 660 | 825 | 416 | 400 | *** |
Effective force I* (kN) | 339 | 339 | 190 | 199 | 115 |
Filling volume (l) | 9,3 | 9,3 | 2,6 | 2,7 | *** |
Weight (kg) | 125 | 70 | 41 | 57/16 | *** |
Claw height (mm) | 105 | - | 100** | - | - |
Internal jacks are also available with higher effective forces on request.
* Possible deviation of the specified forces: ±5% ** Including joint support plate *** Dependent on vehicle type